Application Instructions for the E-Valence Range

st not Cleaning Products

Listed below are the top nine eco-friendly automotive, marine, and aviation cleaning products from E-Valence. However, for the weekly maintenance process, all that is needed is a car wash, a wheel cleaner, and a glass cleaner.

Instant Detailer with Carnauba Wax should be used on all interior surfaces except the upholstery. Use specific interior products, especially those used for cleaning leather and synthetic leather seats and dashboards, every three months. Carpets should be cleaned with a carpet cleaner with an antimicrobial every three months. Interior and correction products will be covered in full in a separate post.

Application instructions are simple to follow; however, should the reader have any questions about applying any of the E-Valence range, please email us at info@e-valence.com, and we will respond within 24 hours.

Wash’n Seal with Carnauba Wax

The ultimate car wash!

Lightly rinse the vehicle with clean water. Pressure rinsing is not recommended.
Add 50-75 ml of the wash concentrate into a 5-litre bucket of warm water. The warm water gets the chemistry working and will help to deliver the best result.
Wash in the usual manner from the top of the vehicle down. Use a clean Microfibre Wash Mitt to wash the vehicle only.
Use a separate Microfibre Wash Mitt of a different colour and a bucket of water to wash the wheels. Rinse regularly and dry off using a Luxury Drying Towel to reveal a showroom shine after the final rinse.

We recommend the 2 Bucket System at E-Valence: one bucket with wash mix and a second with clean, warm rinse water. Always rinse the Wash Mitt in the water before re-dipping in the Wash Mix. You can use a third bucket for the wheels or the car wash bucket after completing the vehicle wash. The ultimate car wash kit is available for purchase on our website.

Click here to read our Car Wash Process. This process is appropriate for washing cars, bikes, boats, and aircraft.

5% of the volume of this product is our carnauba wax mix, easily the highest wax concentration of any carwash on the market today. Enjoy!

Matt Car Wash

Wash matt painted and wrapped cars only with E-Valence Car Wash for Matt Painted and Wrapped Cars. This specially formulated cleaning product will not affect the look of the wrap nor its adhesion to the paint.

Lightly rinse the vehicle with clean water. Pressure rinsing is not recommended.
Add 50-75 ml of the wash concentrate into a 5-litre bucket of warm water. The warm water gets the chemistry working and will help to deliver the best result. Wash in the usual manner from the top of the vehicle down.
Use a clean Microfibre Wash Mitt for washing the vehicle only. Use a separate Microfibre Wash Mitt of a different colour and a separate bucket of water for washing the wheels.
Rinse regularly and dry off using a Luxury Drying Towel after the final rinse.
E-Valence recommends the 2 Bucket System, one bucket with wash mix and a second with clean, warm rinse water. Always rinse the Wash Mitt in the rinse water before re-dipping in the Wash Mix. Use a third bucket for the wheels or the car wash bucket after you have completed washing the vehicle.

If you are ordering the Automotive Cleaning Kit for a matt painted car, please specify in the comments section when making your order.

Click here to view the Automotive Cleaning Kit.

Instant Detailer with Carnauba Wax

The Ultimate Final Finish!

Instant Detailer is best used when preparing at a Concour, as an alternative when water is unavailable, or when the vehicle is slightly dusty. This product will clean paint, glass, and chrome. Instant Detailer may be used to clean internal surfaces, including painted and wooden surfaces such as the dashboard, and door trims. Containing grade 1 carnauba wax, you will be thoroughly delighted with the results you achieved with this product.

Spray over the surface and wipe in one direction using a 270-330 GSM Microfibre Cloth.
Wipe dry with two cloths for best results.

Because this is a water-based product and our triggers are fine mist professional triggers, it is best to wipe wide in the drying process, thus avoiding overspray.

Instant Detailer with Carnauba Wax is the ultimate in a final finish, quick detailer, or general-purpose cleaner.

Dry Wash with Carnauba Wax

Dry Wash with Carnauba Wax is best used as an alternative when water is unavailable. It is a low-grade instant detailer. Accordingly, the instructions are the same.

This product will clean paint, glass, and chrome.

Spray over the surface and wipe in one direction using a 270-330 GSM Microfibre Cloth.
Wipe dry with two cloths for best results.

Clay Mitt Lubricant

Remove Acid Rain and other industrial contaminants with Clay Mitt Lubricant. The formulation will chemically neutralise this form of soiling, allowing the Wash Mitt to glide over the surface, lifting the impurity in the process.

Thoroughly rinse the vehicle. (Do not dry the vehicle at this stage.)
Spray Clay Mitt Lubricant over the surface a section at a time.
Keeping the surface wet, allow the chemical process to work for at least one minute
Gliding the Clay Mitt over the selected area.
Repeat as often as necessary till the surface roughness has completely disappeared.
Rinse off after completing each section.
Finish off by washing the vehicle with Wash’n Seal with Carnauba Wax using the abovementioned process.

The clay mitt process is a more efficient way of removing environmental fallout and is without doubt more effective than using a clay bar.

Carpet Cleaner with Antimicrobial -UV Stable

This product contains a UV Inhibitor, providing extra protection from the sun’s harmful rays.

It is specially formulated to gently agitate and remove dirt and microbial growth from the carpet. Leaving the carpet in a near-new condition with antimicrobial and UV protection protection.

Thoroughly vacuum the carpet first.
Shake the bottle before use.
Apply evenly over the surface to be cleaned and leave for about 60 seconds (depending on the carpet’s condition).
Agitate with a soft brush or sponge.
Wipe over several times with a clean, moist microfibre cloth and allow to dry.

This product may also be used in a steam cleaning system—Email info@e-valence.com for more information.

Tar Rubber & Bug Remover

As the name implies, this is the ultimate Traffic Film Remover.

Depending on the condition

Spray onto the affected surface, wait 15 to 45 seconds
Wipe off with a damp microfibre cloth.

When motor racing, it’s best to clean the tar and rubber off at the end of the day. Leaving racetrack contaminants on the vehicle for extended periods will make them harder to remove. A couple of Tar Rubber and Bug Remover applications will do the job.

Most importantly, this product will not affect signage and other wrappings and will not affect ceramic-based coatings on cars, boats, or bikes.

Idea for the cleaning off of water marks on caravans and RV’s

Click here to read our post on removing watermarks from caravans and RVs.

E-Valence strongly recommend that you wash the vehicle after completing this process.

pH Neutral Alloy & Wire Wheel Cleaner

The Ultimate Eco Friendly Wheel Cleaner and protector!

Most of the alloy wheel cleaners on the market comprise aggressive acids and alkalis. pH Neutral Alloy & Wire Wheel Cleaner uses soft, non-aggressive chemicals to clean and protect alloy, painted, chrome, and stainless steel mag and wire wheels.

Spray onto a cold wheel and leave for about 2-3 minutes.
Use a soft brush or dedicated wash mitt to agitate the surface
Rinse off to finish.

The product performs brilliantly on modern alloy wheels prone to heavy carbon build-up. The wheel cleaner leaves a protective coating lasting 6-8 weeks. When cleaning the vehicle next time, you will only need to jet-wash the alloy wheels. Additionally, given the formulation, you will not leave acid build-up within the rims of wire wheels, reducing potential rust build-up on the inner rim.

Click here to view the video.

Glass Cleaner with Anti-Fog & Antimicrobial

More than just a glass cleaner, this product will kill 99.9% of microbial growth on any glass surface, including the internal side of the windscreen. Also included, is an anti-fogging agent to assist those of us driving old cars. Glass Cleaner with Anti-Fogg & Antimicrobial is a water-based, solvent-free application; wiping over several times during drying may be necessary particularly in cold weather. E-Valence recommends using two cloths when drying any glass surface. (220 GSM microfibre cloths are best)

Spray over the glass surface
Using two 220GSM microfibre cloths, wipe over the surface
Check the glass from several angles to ensure you have removed all the smudges

Interior glass should be cleaned every week to address microbial growth.

The cleaning and conditioning of leather and its derivatives requires a specific process.

Click here to read our specific post on Upholstery and Leather Cleaning and Conditioning

Whilst not part of the regular cleaning process, rubber seals, strips, hoses and gaskets do rtequire attention from time to time.

Click here to read our post on Rejuvenating Rubber Seals Hoses and Gaskets.

Not every car has wire wheels. For those that do here is a process to follow.

Click here to read our post on cleaning, Polishing and Enhancing Chrome & Stainless Steel Wheels.

E-Valence Technology

Much like the surfaces we set out to protect, we’ve ensured that E-Valence places an equal emphasis on the short and long-term health and safety of our customers while, at the same time, adhering to strict moral, ethical, and environmental standards – something we pledge to uphold unconditionally.

Accordingly the entire range is 100% Environmentally Friendly, the sustainable car, boat, and aviation cleaning solution of tomorrow.

The E-Valence products clean and protect any surface they are applied to without penetrating and thus harming that surface, its substrate, or any surrounding seals, whether rubber or silicone. Truly amazing technology. I do hope you enjoy the products. Please call me on my mobile if you require further explanation on any application process.

Charlie Frew

+61488 22 33 22

+447399136754

charlie@e-valence.com