Intermediate Polish
$89.95 GST Inclusive
Intermediate Cutting Polish – Professional Grade Scratch Repair
Buff out scratches. Restore Brilliance. Do it responsibly.
E-Valence Intermediate Cutting Compound Polish is a high-performance, paint correction solution designed to buff out light to medium scratches and restore the deep gloss of high-end automotive finishes.
It is the ultimate in eco-friendly polishes.
Whether you’re correcting a recent respray or refreshing modern 2-pac paint, this is the go-to product for auto scratch repair and paint restoration – trusted by professional detailers, restorers, and car enthusiasts across Australia.
Cutting Compound for Cars, Aircraft, Bikes, and Boats
- Removes minor to moderate surface scratches.
- Our E-Valence Technology provides a high-gloss, glass-like finish with no residue.
- Ideal for car cut and polish tasks after a respray or paint correction.
- Maintains moisture during buffing for a smooth, even application.
- One-step, first and second stage cutting compound
- Wipes away easily with a 270-330gsm microfibre cloth – no chalky fillers, no mess.
- Suitable for cars, aircraft, motorcycles, and marine finishes
Why it’s different
- No silicone
- 99.9% solvent and VOC (volatile organic compounds) free
- 100% biodegradable and eco-friendly
- Leaves behind no residue – just flawless clarity
Professional Tips
- Remember, the speed and design (such as direct drive or free spinning modes), the coarseness of the pad, and the pressure you apply will all influence the speed, depth, and finish of the cut. Keep these factors in mind when planning your process.
- Use as correction process before applying E-Valence APD or Preeminent 50% Carnauba Wax
- For aircraft and race cars, follow with APD to reduce skin friction and boost performance.
- Always wear protective eyewear during application.
If you would like to know more about APD – Anti Parasite Drag
Click here to read our post APD Paint Protection for Aviation.
For more information on Intermediate Polish and its application
Click here to read our Post Polishing Products the E-Valence Range
Used on Australia’s Finest Show Cars
- As seen on the Low Drag E-Type by Concours Sports Car Restoration – proof that this is no ordinary cut and polish. (the fifth photo in the gallery).
Free delivery for orders over $100
Clean the surface to be polished before applying the polish.
As with all polishing, a conservative approach is recommended.
Start with a medium pad and a slow speed on your polisher.
Change to a faster speed or harder pad if necessary.
Clean off any residue between application.
Ensure the surface to be polished is cleaned before application.
Always use new or clean polishing pads.
Take your time until you are acquainted with the polish, pad, and mechanical polisher.
Polish in an extended pattern when addressing swirl marks, and especially when correcting medium scratches.
Ensure the polishing pad is clean before you start and thoroughly clean it during and after use.
The pad may be cleaned during the process by turning the polisher on and holding a nylon shoe brush to the pad.
After the polishing process, wash the pad thoroughly in water.
A Gritguard Cleaning System is recommended if available.
- Remember, the speed and design (such as Direct Drive or free spinning modes), the coarseness of the pad, and the pressure you apply will all influence the speed, depth, and finish of the cut. Keep these factors in mind when planning your process.
Keep out of reach of children.
In case of eye contact, rinse eye thoroughly with water.
If swallowed do not induce vomiting, seek immediate medical attention.
Always wear gloves and protective eyewear and test first.
