Luxury Clay Mitt

$54.95 GST Inclusive

Use Luxury Clay Mitt in conjunction with the E-Valence Clay Mitt Lubricant.

This process is a fast and efficient way of removing industrial contaminants such as Acid Rain from the vehicle surface.

Thoroughly wet the vehicle surface then spray the lubricant onto a selected area and leave for around 15 – 30 seconds.

Glide the Mitt over the sprayed area lifting the contaminants as you go.

During the process regularly rinse the Mitt in clean cold water to remove captured contaminants.

Repeat section by section spraying on more lubricant as and when required till complete.

On a hot day you may need to wet the vehicle on more than one occasion.

This process removes surface contaminants such as bugs, tar, dirt, grit, brake dust and industrial fall out.

Clay Mitt Lubricant will ensure you get the best results from your E-Valence Luxury Clay Mitt.

Providing flawless preparation for the application of E-Valence Preeminent 50% Carnauba Wax.

Please call 1300 845 498 if you require further information.

Free delivery for orders over $100

Spray E-Valence Clay Mitt Lubricant onto the vehicle surface then glide the E-Valence Luxury Clay Mitt effortlessly over the paint surface to remove contaminants.

The clay mitt should be rinsed out regularly during the cleaning process and then thoroughly at the end of the vehicle wash.

May be applied to all external surfaces of the vehicle including glass and metal finishes.

Rinse vehicle thoroughly after application and dry with a E-Valence Luxury drying towel.

It is essential that you thoroughly wet the vehicle before commencing this process.

Work section by section from the top down.

The Clay Mitt Lubricant is chemically formulated to neutralise the industrial fallout.

This may take between 15- 30 seconds depending on contamination.

Additionally, some sections may require the process to be repeated.

Clay mitt in a shaded area with the vehicle surface cool.

Thoroughly rinse the vehicle before commencing.

Spray a small amount of Clay Mitt Lubricant onto a section of the vehicle at a time.

Wait approximately 15-30 seconds then glide the mitt over the surface.

As you glide the mitt over the surface the mitt will work with the lubricant to release the contamination.

Repeat this process if required.

Rinse the next section and repeat as above.

Finish by thoroughly rinsing the car and wiping dry with a E-Valence Luxury Drying Towel.

 

 

The Clay Mitt should be regularly rinsed in clean cold water throughout the process.

Regular rinsing will ensure the Mitt remains contaminant free.

Do not leave the Clay Mitt exposed to sunlight.

With reference to the Clay Mitt Lubricant.

Keep out of reach of children.

In case of eye contact, rinse eye thoroughly with water.

If swallowed do not induce vomiting, seek immediate medical attention.

Always wear gloves and test first.

You may also like…